Description
Application
For best results use on clean, dry substrates between +10°C to +30°C. Insert the cartridge into the slot on the
applicator gun. Once the cartridge is secure, remove the cartridge cap and level the pistons by dispensing a small
amount of material, before attaching the mixing nozzle. Attach the mixing nozzle and dispense adhesive until a uniform
colour is evident. Apply the mixed adhesive to one joint surface, immediately bring the two surfaces into contact and
apply a steady pressure. The cartridge can be re-sealed if only partly used by removing the mixing nozzle, cleaning the
two cartridge openings and replacing the cartridge cap.
NOTE: This product requires a 50ml Mixer Gun or 400ml Mixer Gun for use.
Cartridge size: 50ml comes with one Nozzle.
Adhesive: Methyl methacrylate
Appearance Colour: Off white gel
Operating Temperature: -40°C to +150°C Constant temperature
-40°C to +220°C Intermitten
