Description
Decking strips
Anti-Slip GRP Decking Strips provide an immediate, cost-effective way to increase safety in any environment and can be applied directly to wood, metal, concrete and much more.
Manufactured from the highest quality fibreglass, to ensure longevity and maximum protection, our design allows for quick and easy installation and can be
Pre-drilled option available with an extra charge.
Available in two profile sizes, 50mm and 90mm and a range of standard lengths from 600mm to 3000mm and colours, our decking strips can also be cut to bespoke sizes for the perfect fit. Ideal for both wet and dry environments
Material:
GRP – Glass reinforced polyester with a resin coated gritted surface.
Typical applications: An affordable solution for decking platforms, walkways and bridges and can be used on industrial or construction sites, plus in schools, residential areas, commercial premises and sport and leisure facilities.
Advance preparation
It is essential that any damage or undulations to the receiving substrate are remedied to ensure the decking strips will be on a flat, even and damage free surface.
If using adhesive, clean the substrate thoroughly to remove any oil, grease, dust or loose particles, making sure the underside of the strips is clean, dry and dust-free too.
If the substrate has been affected, such as by oil or particles, or if its surface strength is insufficient, mechanical fixing will be necessary. Before applying an adhesive, it is advisable to carry out a dry-fit first to ensure a suitable fit.
Manufacturer recommendation is to use a double fixing method consisting of a high strength adhesive and mechanical fixings, especially when used in high traffic areas. Using adhesive and mechanical fixing can also be useful to minimise any ‘drumming’ noise when walked upon, which can happen when the substrate is not entirely flat.
Cleaning:
Using a stiff brush will normally be sufficient to remove everyday dirt and debris. For more stubborn dirt, wash with warm water and a mild detergent, or a pressure washer on a lowpressure setting can also be used.
Cutting
Minor adjustments, small cut outs, can be made with a hacksaw or a jigsaw with a suitable blade. We offer a full in-house cutting service, however, should you wish to cut the decking strips yourself, this is easily to do by using orbital cutting equipment with either a stone or diamond blade. Cutting should be carried out externally, or where there is dust extraction, or suitable ventilation. Appropriate protective equipment should always be worn.
Pre-drilling
High-Speed Steel (HSS) drill bits are used for drilling wood, light metals, GRP(Glass Reinforced Plastic) and PVC.
